Differences

This shows you the differences between two versions of the page.

--- troubleshooting [01/16/2024 14:47 (15 months ago)] – admin
+++ troubleshooting [10/22/2024 08:04 (5 months ago)] (current) – [OpenSpot 4 Pro] admin
@@ Line 1: / Line 1: @@
 ====== TROUBLESHOOTING ======
+===== Brandmeister Issues =====
+"Looks like the primary Brandmeister server for US (Chicago) is having issues.  If you are having issues, change your server to Backup 1 (Dallas) or Backup 2 (San Jose).  Seemed to work for me and reproducible with Multi-RX problem." Source: Andrew Harrod\\
+===== Location Disabled =====
+  * "For those getting Location Disabled, do this: Android Settings, Security & location, Privacy Location, Use location slider. If it's off, slide so it's on. If it's disabled, slide to off, then on. RFinder should be listed under Recent location requests. Back out then Restart twice. The GPS at top of radio needs a couple minutes to lock with a good look at the sky. Seconds if it's had a recent lock, up to 10 if it's past a month or so." Source: David Dobbins\\
+  * "If you pull down the dropdown from the top of screen. Look for teardrop (location) it should be highlighted, tap on it if it is not highlighted. May have to swipe to the second page to find, and reboot the phone. Easier way." Source: Bob Vincent
+{{:location-disable.jpg?200|}}
+===== M6 Android Auto =====
+"...I got the Android Auto to work. The trick was connecting a data cable between M6 USB port, not charge port, and the vehicle." "One thing I am not sure that matters, I did have developer turned on. I generally do this with all my android devices to let me play around with the configuration." Source: Randy Umfleet
 ===== M6 Low Audio Reports =====
-"M6 users: FYI, in case you're getting low audio reports and not sure where the teeny tiny microscopic microphone hole is, it's here, lower right corner. That's where you want to speak into."\\
+"M6 users: FYI, in case you're getting low audio reports and not sure where the teeny tiny microscopic microphone hole is, it's here, lower right corner. That's where you want to speak into." Source: David Dobbins\\
-Source: Dave Dobbins/Facebook\\
 {{:m6-mic.jpg?400|}}
@@ Line 19: / Line 32: @@
 \\
 //User Note://\\
-Picked up a new B1+ at Ham Radio Outlet, and the unit works with the OpenSpot 4 Pro (hears announcements, tx, rx). It appears the issue was with the first unit itself; for some reason it wasn't compatible with the OS4 Pro. New unit - sideloaded current (Oct 20, 2022) RFinder version without issue: {{ :rfinder_ham_rf1_1.6.apk |}}\\
+Picked up a new B1+ at Ham Radio Outlet, and the unit works with the OpenSpot 4 Pro (hears announcements, tx, rx). It appears the issue was with the first unit itself; for some reason it wasn't compatible with the OS4 Pro. New unit - sideloaded current (Oct 20, 2022) RFinder version without issue.\\
+===== P7 Discharging =====
+Q: "My P7 will all of a sudden starts discharging even though it is plugged in while monitoring, I am using the supplied cable and charging block. I will have to unplug and restart in order for it to charge again. Has anyone experienced this and if you did, was there a simple fix?"\\
+A: "Yes, mine too, Joe. I have actually been charging it on the right side USB-C and it charges to 100% ok, and stays there. When I plugged into left side I don't remember, but it ended up 0 overnight. Had to unplug once right side and plug back in to start charging." Source: Dave Dobbins\\
+===== Rebooting Continuously =====
+Q: "My B1 has started rebooting...continuously. Tried resetting to factory config, still the same. Any ideas how to approach this problem will be greatly appreciated."\\
+A: "Mine did the same, reached out to Bob and he advised me to put the radio on the charger for a few seconds then power on while on the charger. It fixed my issue. Help this helps." Source: Jeremy Burris\\
+===== Screen =====
+"For anyone interested in using the RFinder B1+ in bright sunlight, I've found a solution:\\
+In Android settings, choose accessibility, Font Size and choose largest. Turn on Color Inversion. Then choose Experimental, High Contrast text and turn the switch on. Voilá, it's visible. See photo." Source: James Hardaway\\
+{{:b1plusscreen.jpg?400|}}
 ===== Slow Speech =====
@@ Line 30: / Line 56: @@
 __Issue__: //While in DMRoIP, radio will go red for tx and then drops off.//\\
 If you are not getting the double tone when pressing PTT, check volume on the right side of your RFinder B1 if the volume is mute. Lowest setting- you won't get the tone when pressing PTT, increase the volume on the right side and press PTT- you should get the double tone when pressing PTT when the TG is inactive.\\
+===== Volume =====
+Q: "I have a B1+ that is still working fine. However, the last time I turned it on I notice the volume on BMR Brandmeister was quiet. I had the volume on full but it was way too quiet to listen in the car for example. Has anyone else noticed this?\\
+A: "Turn the volume down to 3 and reboot. 3 is the default setting. Mine works fine on my B1c and B1+. My normal setting is 5." Source: Bob Vincent\\
+\\
+Q: "I have the B1 + with the Bluetooth dongle and Bluetooth mic and Bluetooth ear loop. With no other way but using the radio speaker only and turned up to 16. I can barely hear any sound. I have the dongles off and unplugged. Can anyone tell me why my audio is so low?"\\
+A: "It is NOT the dongle or Bluetooth equipment. Bob is correct. The trick is to ALWAYS turn you volume down to 3 when you turn off the radio or reboot." Source: James Hardaway\\