Differences

This shows you the differences between two versions of the page.

--- tablets [11/25/2022 12:37 (2 years ago)] – admin
+++ tablets [01/24/2024 09:42 (15 months ago)] (current) – admin
@@ Line 1: / Line 1: @@
 ====== TABLETS ======
 ☛ [[https://rfinder.net/docs/RFinder-7-inch-Tablet-Brochure.pdf|RFinder 7 inch Tablet Brochure]]\\
+----
 ===== 3D Print RFinder P10 AMPS Pattern Microphone Clip =====
@@ Line 6: / Line 8: @@
 "For all the P10 users, I made a mount to hang the external mic using the AMPS pattern on the back. It is made thin so you can still use a car mount if you'd like. Because of the lip on the tablet, it doesn't lay perfectly flat across the back, but so far seems to flex that little bit just fine using PLA+."\\
 Source: Ted Porter on RFinder Users Group (Facebook).\\
-STI file: {{ :rfinder-p10-amps-pattern-microphone-clip.zip |}}\\
+☛ STL file: {{ :rfinder-p10-amps-pattern-microphone-clip.zip |}}\\
 {{:3dprintp10.jpg?400|}}
@@ Line 12: / Line 14: @@
 Great info from Dave Krum.\\
-Page: [[P2 Headset]]\\
+☛ Page: [[P2 Headset]]\\
 {{:p2-headset.jpg?400|}}
+===== Mounting =====
+The P10 under the hand strap has a standard AMPS 4 hole screw pattern. All of the RFinder tablets P10/P7/P2 have this 4 hole AMPS mount. You can use any mount that has that pattern.\\
+\\
+RAM has several types on mount and ball size B is plenty large enough to hold the P10. Screws required for the tablets on the AMPS inserts are M4 x 0.70 x desired length (insert depth is 5mm). RAM ball B part RAM-347U will mount directly to the back of the P10/P7/P2 tablets with 12mm long screws with ram part listed above. Once you have ball B attached, any ball B arms/clamps and mounts can be used as needed to get the P10/P7/P2 where you want it.\\
+\\
+Screws: Thread size = M4, Thread pitch = 0.7mm, Insert depth = 5mm\\
+☛ Here's one source for the screws (revise length for your needs): [[https://www.mcmaster.com/screws/rounded-head-screws/system-of-measurement~metric/thread-size~m4/thread-pitch~0-7-mm/length~5-mm/rounded-head-style~button|McMaster-Carr]]\\
 ===== P7 Tablet =====
@@ Line 43: / Line 54: @@
 Screw hole pattern on the back is AMPS.\\
 Screws: Thread size = M4, Thread pitch = 0.7mm, Insert depth = 5mm\\
-Here's one source for the screws (revise length for your needs): [[https://www.mcmaster.com/screws/rounded-head-screws/system-of-measurement~metric/thread-size~m4/thread-pitch~0-7-mm/length~5-mm/rounded-head-style~button|McMaster-Carr]]\\
+☛ Here's one source for the screws (revise length for your needs): [[https://www.mcmaster.com/screws/rounded-head-screws/system-of-measurement~metric/thread-size~m4/thread-pitch~0-7-mm/length~5-mm/rounded-head-style~button|McMaster-Carr]]\\
-==== P10 SDR (software defined radio) ====
+==== P10 SDR (Software Defined Radio) ====
   * If the SDR apps can't find the RTL-SDR chip, set your USB to OTG. "Even though it is internal it is external to the android system, hence why you have to turn on the OTG to make it work."
@@ Line 51: / Line 62: @@
   * //RF Analyzer 1.13// is the app that's already installed on the P10
-===== Mounting =====
-The P10 under the hand strap has a standard AMPS 4 hole screw pattern. All of the RFinder tablets P10/P7/P2 have this 4 hole AMPS mount. You can use any mount that has that pattern.\\
-\\
-RAM has several types on mount and ball size B is plenty large enough to hold the P10. Screws required for the tablets on the AMPS inserts are M4 x 0.70 x desired length (insert depth is 5mm). RAM ball B part RAM-347U will mount directly to the back of the P10/P7/P2 tablets with 12mm long screws with ram part listed above. Once you have ball B attached, any ball B arms/clamps and mounts can be used as needed to get the P10/P7/P2 where you want it.