Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| p2_headset [07/29/2022 18:35 (3 years ago)] – created admin | p2_headset [08/23/2022 08:51 (3 years ago)] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Headset Adapter for P2 to Retevis Headset ====== | ====== Headset Adapter for P2 to Retevis Headset ====== | ||
| **Headset Adapter for P2 to Retevis Headset**\\ | **Headset Adapter for P2 to Retevis Headset**\\ | ||
| - | Source: Dave Krum\\ | + | //Source: Dave Krum//\\ |
| \\ | \\ | ||
| Parts List (All parts listed were ordered from Amazon)\\ | Parts List (All parts listed were ordered from Amazon)\\ | ||
| Line 14: | Line 14: | ||
| shrink tube, make sure you put the tube on before soldering your connections. I cut the wires shorter | shrink tube, make sure you put the tube on before soldering your connections. I cut the wires shorter | ||
| for convenience and tinned the ends. I then soldered the wires according to the following table.\\ | for convenience and tinned the ends. I then soldered the wires according to the following table.\\ | ||
| - | \\ | + | < |
| - | 3.5mm Jack, 3.5mm Plug\\ | + | 3.5mm Jack |
| - | Black, White\\ | + | Black White |
| - | White, Black\\ | + | White Black |
| - | \\ | + | |
| - | 2.5mm Jack, 3.5mm Plug\\ | + | 2.5mm Jack |
| - | Black, Green\\ | + | Black Green |
| - | Red, Red\\ | + | Red Red |
| - | \\ | + | </ |
| I put a large piece of tubing on the 3.5mm plug wire before starting and put heat shrink tube on each | I put a large piece of tubing on the 3.5mm plug wire before starting and put heat shrink tube on each | ||
| of the wires and shrunk down as I went and. I cut off the unneeded wires and pulled the larger shrink | of the wires and shrunk down as I went and. I cut off the unneeded wires and pulled the larger shrink | ||